On Land

Environment Information
At Rill Architects we run ArchiCAD on Mac OS X. If you work at Rill, this is your stuff. If you don't, but you work in ArchiCAD, you may find something interesting. Anybody else, I don't know.
RSS
Searched for "masonry"

8 Results

Location: 04 Masonry An extrusion in the shape of a sloped brick rowlock course. Set the Angle and Brick Width of the rowlock, and the Thickness and Air Space of the veneer it rests upon. The Mortar Bed option will draw a wedge of mortar below the brick in large scale sections. The brick itself uses the object's fill
Location: 04 Masonry / 2D Masonry 2D symbol for brick walls in large scale sections and details. It will alternate bricks and joints. The height of a brick is controlled by the Brick Triplet Height, which is the height of three bricks. You can directly set the Joint Width and Reveal. In Section Mode, the width is set by
(A door.) Location: 04 Masonry Make it Flat or not. If it's arched, you can set either the Spring Height or the Arch Height, and the other dimension will change to maintain the overall height. If Flat is on, the arch/lintel can be Segmented (separate arch stones) or Solid (a one-piece lintel). With Flat off, the curved arch must
The new one is better. (A door.) Location: 04 Masonry Make it Flat or not. If it's arched, you can set either the Spring Height or the Arch Height, and the other dimension will change to maintain the overall height. You can show Joint Lines representing the stones, and set a Stone Max Width. The lines use the Joint Pen.
Location: 04 Masonry A brick arched wall niche. Duh. Right now it can only do a semicircular arch. It will draw the brick lines on the sides and around the arch. The sill is optional. In plan, the niche will display correctly. If using the Reflected Ceiling Plan display option, the niche will disappear completely, as if if it was
For all JAM8 windows, I have added the ability to extend the masonry sill past the masonry opening. The parameter is called 'Sill Bearing'. The default is zero.
Location: 04 Masonry / 2D Masonry. Shows bricks and mortar joints for large scale section details. The fills and dimensions are parametric, and it can be stretched to any length and it will end properly in the middle of a brick or joint. I am working on a lot of brick-related stuff for the Stevens project, including more detail objects
I have updated the version 8 doors and windows with an option to build a masonry jamb.